Mercury Marine Vengeance 48-17310A46 Stainless Steel Boat Propeller Application Guide
You Are Viewing Engines For:
- Manufacturer: Mercury Marine
- Prop Family: Vengeance
- Part Number: #48-17310A46
- Rotation: Standard Rotation
- Diameter: 14”
- Pitch: 10”
2-Piece Props
Aluminum vs. Stainless Steel
3 vs. 4 Blades
Diameter
Choose your engine to see propellers equivalent to a Mercury Marine Vengeance #48-17310A46
Manufacturer
Engine Description
Year(s)
Merc/Mariner/SeaRay
Outboard
50 HP, 4-Stroke, Bigfoot
(Thru Hub Exhaust & 15 Tooth Spline)
All Years
Merc/Mariner/SeaRay
Outboard
60 HP, 4-Stroke, Bigfoot
(Thru Hub Exhaust & 15 Tooth Spline)
All Years
Prop Exhaust Types
Thru-hub has holes around the prop hub.
Thru-hub Exhaust Most outboard & stern drive engines vent exhaust thru the prop hub.You have a thru-hub exhaust if there are exhaust holes on the engine gearcase around the prop shaft. |
Non thru-hub is solid around the prop hub.
Non Thru-hub Exhaust Non thru-hub exhaust systems are found mostly on low horsepower motors.You have a non thru-hub exhaust if there are NO exhaust holes on the engine gearcase around the prop shaft. |
Prop Splines
Count the teeth on your prop shaft to determine spline count.
Prop splines are the little teeth you see on your prop shaft and inside the prop hub.
The number of splines on the shaft and inside the prop must match for the prop to fit your boat.
A Pin Drive prop application has no splines. The prop is secured to a smooth prop shaft with a pin through the shaft.